Applications of Thermal Management Systems for New Energy Vehicles


Release Date:

2022-10-19

The operating principle of a thermal management unit for new-energy vehicles is as follows: the heat-transfer medium—typically water or oil—is pumped from an oil tank equipped with a built-in heater to the temperature-control device, and then returned to the tank.

   New Energy Vehicle Thermal Management Unit Its operating principle is as follows: the heat-transfer medium—typically water or oil—is pumped from a tank equipped with an internal heater to the temperature-control unit, and then returned to the tank. The controller adjusts the temperature of the heat-transfer fluid based on either the fluid‑side temperature measured by a temperature sensor or the internal temperature of the temperature-control device, thereby regulating the temperature of the controlled system. The thermal management units for new‑energy vehicles are divided into two sections—the heating section and the cooling section—and can switch between them, accelerating production, reducing energy consumption, improving molding efficiency, and minimizing defective products. These units are widely used in composite materials, new‑energy applications, automotive interiors, chemical processing, and other industries, particularly in the new‑energy sector and in new‑energy testing.

  

 New Energy Vehicle Thermal Management Unit

  The new‑energy vehicle thermal management unit features computer‑touch control, automatic calculation, and a customizable multi‑point temperature control module. It precisely regulates temperature automatically and quickly reaches the set point, with both the set value and the actual value displayed separately. An isolated electrical control cabinet extends the service life of the equipment, while explosion‑proof piping, built‑in safety protection, low noise, high‑temperature resistance, and corrosion‑ and rust‑proofing ensure reliable performance. Its unique heating design delivers energy savings and durability, making it suitable for a wide range of temperature‑control applications.

  Application of integrated hot‑and‑cold mold temperature controllers in the new‑energy lithium‑battery and separator industries: used for temperature control of lithium‑battery cathode and anode materials. New Energy Vehicle Thermal Management Unit It primarily provides both heating and cooling sources for reaction vessels and double-cone vacuum rotary dryers, enabling physical and chemical reactions within the process while ensuring precise temperature control. Customized configurations are available to meet specific customer requirements, including PLC‑level temperature control, programmable heating and cooling profiles, temperature‑curve recording, remote operation, and data transmission. Mold temperature controllers can be deployed in conventional wet‑process lithium‑film production lines, dry‑process lithium‑film lines, and coating‑machine lines, where they mainly regulate the heating or cooling of extrusion die heads and drum dryers.

  The application of new‑energy vehicle thermal management units in wind‑turbine blade manufacturing primarily provides a heat source to maintain a constant temperature within the blade molds. Typically, water‑based mold temperature controllers are required to deliver a stable temperature of around 60°C. These units offer both single‑heating output and dual heating/cooling outputs, along with stepwise temperature control for automatic ramp‑up and shut‑off functions, and can be equipped with RS‑485 remote communication. A paperless data logger enables storage of temperature data or temperature profiles. The new‑energy vehicle thermal management units incorporate multiple protection features, including pressure monitoring, over‑temperature safeguards, automatic air venting, bypass circuits, phase‑loss and phase‑break detection, emergency stop, and phase‑sequence protection. The pumps used are from Nanfang, offering high quality, low noise, large flow rates, excellent sealing performance, and zero oil leakage.

   New Energy Vehicle Thermal Management Unit Having been widely used in the new energy sector for many years, these systems have been deployed in numerous real-world projects with excellent performance. There’s no need to worry about whether the equipment is suitable or safe. Today, the quality of equipment produced by most manufacturers on the market continues to improve. Customers in the new energy industry can confidently choose integrated hot‑and‑cold mold temperature controllers for precise temperature management.



Zhejiang Loda Refrigeration Technology Co., Ltd.

Address: Xiayang Village, Xiazhuhu Subdistrict, Deqing County, Huzhou City, Zhejiang Province

Fax: 0571-88526093

Email: 409611431@qq.com